Skip to content
mimi

Software Engineer Drone Systems

Hawk Aerospace Private Limited

Mumbai · On-site Full-time ₹300k – ₹350k/yr Today

About the role

About

We are a fast-growing Agriculture Drone Manufacturing & Drone Service Provider expanding into Europe and looking for Self-Sponsored Visa Software Engineers who want to build next-generation drone technologies and relocate to Europe.

Location

  • Europe United Kingdom
  • Self-Sponsored A Work Permit Applicants Only

Responsibilities

  • Design and develop embedded firmware in C/C++ for microcontrollers and processors used in drone platforms.
  • Implement real-time operating systems (RTOS) for flight control, navigation, payload management, and safety-critical tasks.
  • Develop, integrate, and maintain sensor drivers including IMU, GPS, barometer, magnetometer, cameras, and LiDAR.
  • Implement and optimize communication protocols such as UART, SPI, I2C, CAN, and MAVLink.
  • Optimize embedded software for performance, reliability, and low power consumption.
  • Debug and validate firmware using JTAG, SWD, logic analyzers, and oscilloscopes.
  • Design, review, and support schematics and PCB layouts for flight controllers and peripheral boards.
  • Select and evaluate MCUs, SoCs, sensors, PMICs, and RF modules for drone systems.
  • Lead PCB bring-up, hardware testing, and validation, collaborating with manufacturing teams on DFM/DFT.
  • Develop drone flight-control, navigation, and mission-planning software.
  • Integrate sensors and payloads for real-time data processing and autonomous operations.
  • Participate in field testing, flight validation, and performance tuning of drone systems.
  • Design, train, and deploy AI/ML and computer vision models for agricultural use cases including crop health monitoring, soil analysis, pest detection, and yield prediction.
  • Build image segmentation and object detection models using RGB and multispectral aerial data.
  • Develop end-to-end computer vision pipelines for data preprocessing, annotation, training, validation, and inference.
  • Conduct applied research in reinforcement learning for autonomous drone navigation and mission optimization.
  • Evaluate model accuracy, robustness, and scalability using real-world agricultural datasets.
  • Optimize AI models for on-board and edge deployment, ensuring low latency and energy efficiency.
  • Operate drones for field surveys, crop monitoring, mapping, and data acquisition missions.
  • Plan and execute autonomous and semi-autonomous flights, ensuring sensor calibration, flight safety, and data quality.
  • Collaborate with hardware and embedded teams to integrate AI models into drone flight systems.
  • Conduct field validation of autonomous behaviors and AI-driven insights.
  • Build and maintain end-to-end data pipelines for drone image ingestion, storage, processing, and analytics.
  • Integrate AI solutions with embedded systems, ground control stations, and cloud platforms.
  • Monitor system performance and continuously improve reliability under real-world conditions.
  • Support sales and marketing initiatives through technical input, product demonstrations, and customer engagements.
  • Assist with proposal development, pricing strategies, and technical presentations.
  • Gather customer feedback and market insights to guide product improvements and feature development.
  • Act as a technical liaison between engineering, business development, and external stakeholders.

What We’re Looking For

  • B.Tech/B.E. in CS/Robotics/Electronics
  • Knowledge of Python/C++/ROS
  • Commercial pilot certification (FAA Part 107 or EU equivalent)
  • EASA-compliant Multirotor RTK-enabled drone equipped with specification 20 MP RGB camera, GPS + waypoint navigation and Jetson edge AI

Freshers encouraged — Training provided

Immigration & Relocation Information

  • Applicants must independently meet UK or EU right-to-work requirements
  • The company does not provide direct visa sponsorship
  • Candidates are responsible for visa, relocation, and associated costs

What We Offer

  • Salary as per labour law minimum wages UK or EU, its depends on location and their wages policy (minimum EURO 25,000).
  • Structured training in embedded systems, AI, and autonomous drones
  • Exposure to real‑world agricultural deployments across the UK and Europe
  • Opportunity to work in a high‑growth, technology‑driven environment
  • End‑to‑end involvement in hardware, software, AI, and field operations

Relocation & Visa

Candidate manages own visa/relocation cost.

Apply Now

Send your CV + portfolio to: hr@hawkaerosystem.co.uk

Job Details

  • Job Type: Full-time
  • Pay: ₹300,000.00 - ₹350,000.00 per year
  • Work Location: In person

Requirements

  • B.Tech/B.E. in CS/Robotics/Electronics
  • Knowledge of Python/C++/ROS
  • Commercial pilot certification (FAA Part 107 or EU equivalent)
  • EASA-compliant Multirotor RTK-enabled drone Equipped with specification 20 MP RGB camera, GPS + waypoint navigation and Jetson edge AI

Responsibilities

  • Design and develop embedded firmware in C/C++ for microcontrollers and processors used in drone platforms.
  • Implement real-time operating systems (RTOS) for flight control, navigation, payload management, and safety-critical tasks.
  • Develop, integrate, and maintain sensor drivers including IMU, GPS, barometer, magnetometer, cameras, and LiDAR.
  • Implement and optimize communication protocols such as UART, SPI, I2C, CAN, and MAVLink.
  • Optimize embedded software for performance, reliability, and low power consumption.
  • Debug and validate firmware using JTAG, SWD, logic analyzers, and oscilloscopes.
  • Design, review, and support schematics and PCB layouts for flight controllers and peripheral boards.
  • Select and evaluate MCUs, SoCs, sensors, PMICs, and RF modules for drone systems.
  • Lead PCB bring-up, hardware testing, and validation, collaborating with manufacturing teams on DFM/DFT.
  • Develop drone flight-control, navigation, and mission-planning software.
  • Integrate sensors and payloads for real-time data processing and autonomous operations.
  • Participate in field testing, flight validation, and performance tuning of drone systems.
  • Design, train, and deploy AI/ML and computer vision models for agricultural use cases including crop health monitoring, soil analysis, pest detection, and yield prediction.
  • Build image segmentation and object detection models using RGB and multispectral aerial data.
  • Develop end-to-end computer vision pipelines for data preprocessing, annotation, training, validation, and inference.
  • Conduct applied research in reinforcement learning for autonomous drone navigation and mission optimization.
  • Evaluate model accuracy, robustness, and scalability using real-world agricultural datasets.
  • Optimize AI models for on-board and edge deployment, ensuring low latency and energy efficiency.
  • Operate drones for field surveys, crop monitoring, mapping, and data acquisition missions.
  • Plan and execute autonomous and semi-autonomous flights, ensuring sensor calibration, flight safety, and data quality.
  • Collaborate with hardware and embedded teams to integrate AI models into drone flight systems.
  • Conduct field validation of autonomous behaviors and AI-driven insights.
  • Build and maintain end-to-end data pipelines for drone image ingestion, storage, processing, and analytics.
  • Integrate AI solutions with embedded systems, ground control stations, and cloud platforms.
  • Monitor system performance and continuously improve reliability under real-world conditions.
  • Support sales and marketing initiatives through technical input, product demonstrations, and customer engagements.
  • Assist with proposal development, pricing strategies, and technical presentations.
  • Gather customer feedback and market insights to guide product improvements and feature development.
  • Act as a technical liaison between engineering, business development, and external stakeholders.

Benefits

Structured training in embedded systems, AI, and autonomous dronesExposure to real-world agricultural deployments across the UK and EuropeOpportunity to work in a high-growth, technology-driven environmentEnd-to-end involvement in hardware, software, AI, and field operations

Skills

C++CANI2CIMUJetsonLiDARMAVLinkMLMcuNavigationPCBPMICPythonRTOSROSRGBSPISoCUARTAI

Don't send a generic resume

Paste this job description into Mimi and get a resume tailored to exactly what the hiring team is looking for.

Get started free